Shot blasting machine

Cast Steel Shot, Metal Abrasive, Stainless Steel Shot

Shot peening machine principle Shot blasting machine also known as shot blasting machine This type of caterpillar shot blasting machine is suitable for multi-species, large or medium-sized production of the workpiece surface rust or shot blasting strengthening, clean up the workpiece must be afraid of the impact of a single weighing below 150kg castings And heat treatment parts, the machine can be used alone, but also wiring use. It belongs to the scope of casting machinery. Automatic: The workpiece is placed in a rubber track roller, the operator presses the "Run" button, the blasting chamber door is pneumatically closed, the shot blasting is started, the track runs forward, the workpiece is continuously tumbling, and the high efficiency powerful blasting machine throws The pellets are ejected at high speed onto the surface of the workpiece that is tumbling, and the workpiece can be cleaned completely and evenly. The steel pellets flow into the screw conveyor through the hole in the crawler, and then the steel pellets are sent to the bucket elevator, and are lifted to the separator by the bucket elevator, and are separated and stored for use. After shot blasting, the blasting chamber door is automatically opened, the crawler belt is reversed, and the workpiece is discharged. Crawler Shot Blasting Machine Application: Cleaning and light decoration of die castings, precision castings, and precision forgings. Remove surface oxides from heat-treated parts, castings, and forgings. Spring strengthening. Fastener rust removal and pretreatment.

Shot blasting machine features:

1. Reference to Germany's shot blasting machine at the end of the 1990s for domestic manufacture.

2. High-efficiency direct-coupled powerful shot blasting device with high transmission efficiency and large shot-blasting volume.

3. The separation efficiency of high efficiency air separation separator and pellets is more than 99%.

4. The projectile is evenly covered and there is no dead pellet.

5. Wear-resistant parts have long service life and they can be quickly replaced.

6, equipment, low noise operation.

7, electrical relay (or PLC) control, control cabinet, sound and light alarm device, PC Mitsubishi brand, the main original device using Siemens joint venture brand operation is simple and reliable.

Shot blasting machine scope of application: This machine is the use of high-speed rotary impeller to throw the projectile on the workpiece in the track continuously flipped, so as to achieve the purpose of cleaning the workpiece. It is suitable for sanding, rust removal, descaling and surface hardening of small castings, forgings, stampings, gears, springs, etc. in various industries. This machine is a new product designed and developed by integrating domestic and foreign technologies. It is a cleaning device with high efficiency, compact structure, low noise, and complete set.

Shot blaster features:

1. The machine adopts a cantilever centrifugal blasting machine, which has the advantages of long service life and simple structure.

2. The BE type separator has good separation effect and high productivity, and has a positive effect on improving the blade.

3. With the bag filter, the dust emission concentration is lower than the national standard, greatly improving the operator's working environment.

4. The use of wear-resistant rubber tracks reduces the impact and damage on the workpiece and reduces the noise of the machine. Shot Blasting Machine Description Crawler Shot Blasting Machine is our company's standard shot blasting equipment. It is a shot blasting machine that transfers kinetic energy through a motor speed reducer. The shot blasting machine drives the drum by a supporting roller. The drum rotates smoothly at a speed of 3r/min, so that the parts of the shot blasting drum body roll gently, allowing the parts to be under different angles. The whole body receives the impact and scraping of shot blasting, which can not only remove the rust, sticky sand, dirt, etc. on the surface of the workpiece. At the same time, the shot blasting machine can also improve the internal stress of the workpiece, improve the surface quality of the workpiece, and achieve the purpose of cleaning and strengthening. Improve the fatigue resistance of the workpiece.

Shot Blasting Machine Advantages 1. The use of internationally advanced cantilevered centrifugal blasting machines with large shot blasting and high projectile speeds can significantly increase the cleanup rate and achieve satisfactory cleanup quality.

2. All drawings of the simulated projectile and shot blasting machine are completely drawn by computer-aided design (CAD), and the selection and arrangement of the blasting machine is more reasonable.

3. The adoption of the popular non-pit structure form saved the construction cost and time of the pit foundation, and solved the problem of corroded lumps in the hoisting machine caused by the user's pit water. The hook has the functions of lifting, running and indoor rotation.

4. The use of high-chromium plate protection in the cleaning room has greatly improved the service life, beautiful appearance and easy replacement.

Hook Shot Blasting Machine Automatic: The workpiece that needs shot blasting is hung directly on the hook or pylon, and it is manually brought to the traction system at the front of the blasting chamber. The hook automatically enters the blasting chamber. After the hook enters the blasting chamber, the blasting chamber door will be pneumatically closed and electrically interlocked to prevent other people from accidentally opening the blasting chamber door when the workpiece is shot blasted in the blasting chamber. The hook enters the blasting chamber to reciprocate and rotate back and forth in the set interval position, so that the workpiece is fully projected and the ejection dead angle is reduced. Two hooks, one hook projectile in the shot blasting chamber, and another hook for loading and unloading work pieces. The time for shot blasting can be adjusted arbitrarily. After the blasting machine is stopped, the blasting chamber door is opened to bring in and take out the workpiece. The dust generated during shot blasting is filtered and discharged by a secondary dust collector.